Engineering Unit Conversion

Engineering Unit Conversion

10,000 - 50,000 downloads

Add this app to your lists
UnitConv app helps in quick unit conversion from SI units to USCS/Imperial and vice versa for most of the units associated in engineering conventions and computations. Therefore, App can be very handy for engineers and students dealing with subjects such as thermodynamics, fluid mechanics, heat transfers and other applied engineering subjects where property data requires frequent conversion.

This app covers units under following18 major categories.

1. Mass (kg, lbm, slug, ounce, grain, M. Tonne, Ton)
2. Length (meter, ft, cm, in, mm, km, mile)
3. Area (m^2, ft^2, cm^2, in^2)
4. Volume (liter, gal (US), gal (UK), m^3. ft^3, fl_oz)
5. Temperature (deg C, deg F, Kelvin, Rankin)
6. Flow rate (lpm, gpm, cc/sec, ci/sec)
7. Force (Newton, dyne, kgf, lbf)
8. Pressure (kPa, Bar, psi, atm, kgf/cm^2, in_wg, mm_Hg )
9. Velocity (m/sec. ft/sc, kmph, mph)
10.Energy (Joule, cal, BTU, m.kgf, ft.lbf)
11.Power (kW, hp, kcal/s, BTU/hr, kgf.m/s, lbf.ft/s)
12.Density (kg/m^3, lb/ft^3, m/cc, lbf.sec^2/in^4)
13.Dynamic Viscosity (Pa.sec, poise, cP, reyn, kgf.sec/m^2, lbf.sec/ft^2)
14.Kinematic viscosity (stokes, cSt, newts)
15.Specific heat (joule/kg.K, BTU/lb.F, cal/kg.C)
16.Thermal Conductivity (W/m.K, BTU/hr.ft.F)
17.Enthalpy (kJ/kg, BTU/lb)
18.Entropy (kJ/kg.K, BTU/hr.R)

By default app provides conversion factor. However, users can enter data to convert its value in another unit. There is a separate section on Standard Gas Flow rate unit conversion. The following screen shots illustrate this for gas flow rates, pressure and dynamic viscosity.

With Best Compliments From
Kaup Shenoy Associates.

Tags: engineering unit conversion, imperial uscs si cm, javascript converting engineering units.

Recently changed in this version

Gas flow rate unit conversion has been added as part of Flow rate unit conversion since it needs additional info on standard pressure and temperature.
Modified screen layouts with new tool bar buttons as shown in screen shots. Added button to display the conversion table for given category and chosen unit from unit A spinner as shown in the screen shots.
Fixed the Android run time exception caused under certain conditions and also updated the conversion table to display up to 4th decimal place.

Comments and ratings for Engineering Unit Conversion
  • (61 stars)

    by Matthew Warren on 08/01/2014


  • (61 stars)

    by Soleh Subarkat on 02/01/2014

    Aplikasi konversi yang cukup membantu

  • (61 stars)

    by jeff rey on 25/12/2013

    Kpa to psi is faulty. No multi-unit compositions like lbs/ft to kg/m available. Does not have units outside of SI and Traditional.

  • (61 stars)

    by Sameeh Sharif on 21/12/2013

    Temp. in - is not there mr. Eng.

  • (61 stars)

    by Priyansh Gupta on 02/12/2012

    App is good ..but styling sucks yo ! ur in 21st century man !! work on aesthetics