Ask your app and mobile related questionStart a discussion in the Appszoom Forum and get the answers you needX Close

OTG UART HyperTerminal Free

OTG UART HyperTerminal Free

50,000 - 100,000 downloads

Add this app to your lists
View bigger - OTG UART HyperTerminal Free for Android screenshot
View bigger - OTG UART HyperTerminal Free for Android screenshot
View bigger - OTG UART HyperTerminal Free for Android screenshot
This is a testing tool that makes mobile phone or Tablet a portable UART/RS-232.
With it, people don’t carry bulky PC or buy expensive UART testing equipment.

If there’s a USB OTG function in your mobile or Tablet, you just need to download the APP, prepare USB OTG Cable and USB Serial Port. That will make your mobile or Tablet testing tool of UART/RS-232.

** The FDTI Chip doesn't support yet, might be support in the futer.

Baud Rate: 1200 ~ 115200
Parity Bit: EVEN, ODD, NONE
Display Mode: HEX or Normal
Store Data function.

System Requirements:
Over Android 2.3 version
A USB OTG interface in mobile or Tablet .
USB OTG Cable.
The USB Serial Port adapter.

For the sake of various standards of Android mobile phone and Tablet, please check your mobile as below to make sure that app can work well:
1. Please check if mobile support the function of USB OTG.
2. Though some mobiles have OTG function, they still need the permission of ROOT while using UART.
3. Though some mobiles have OTG function, they don't supply power in the USB port. Hence, you must prepare power or USB HUB.
4. The mount point of UART adaptors in some mobiles are not absolutely the name of “/dev/usb”, you can use file manager to check the mount point and inform us the name of it also.
5. Anyway, you should see the UART adapter in your mobile device, and it may be in the "/dev/usb"

1. The advertisement will be removed from paying version.
2. If there's any problem, please feel free to contact us soon.

Tags: hyperterminal for usb otg, otg uart hyperterminal, uart, usb terminal otg, otg hyper terminal, otg coding, otg to rs232, hyper terminal, rs232, otg with zoom?.

Recently changed in this version

1.The input word will directly send to UART Port.
2.You can press Volume Down to open Soft keyboard.
3.Add Control Key function:
Volume Down + 'A' ~ 'Z' = Ctrl+A (01) ~ Ctrl+Z(26).
Volume Down + ' ' = Code 00
Volume Down + 'Del' = Escape (27).
4.Add 10 set of Macro:
Sending method: Volume Down + '0' ~ '9' = Macro 0 ~ Macro 9.
5. If you wants to send by HEX you can define it in Macro.
6. Add Drive Directory which enables users to set for search.

PS:Doesn't support FDTI Chip yet.

Comments and ratings for OTG UART HyperTerminal Free
  • (59 stars)

    by Low Zhi Heng on 24/01/2014


  • (59 stars)

    by Prajwal K S on 14/01/2014

    Not supporting for xolo q800. Fix it

  • (59 stars)

    by Brandon Landers on 17/09/2013

    Works perfect on sgs3, no need for a laptop anymore just a OTG cable! Woop!! Only downside is the UI it would be nice if it was a little better, and if it was, i'd easily spend 2-5$ on it. But until there's a UI update, free version it is. Ps. Just because of the UI it's not worth taking away a star, this app is great.

  • (59 stars)

    by Danny Karpouzis on 30/08/2013

    Still very raw, not a lot of features. One problem on Gallaxy S2, "i" key only comes up in UPPER case. Can't seem to find a way to get a lower case "i", there fore making this unusable for me. I can type a lower case "i" in the macro setup, but not directly from the KB to the screen.

  • (59 stars)

    by Yograj Ng on 23/06/2013

    This app does support lava xolo q800? Plz... tell me

  • (59 stars)

    by Nairui Luo on 20/06/2013

    cannot connect to my MSP430 on /dev/ttyACM0

  • (59 stars)

    by Travis G on 11/05/2013

    All I see is a blank screen with the ads at the bottom of the screen. :( I really wanted this to work cause I want to be able to serial conect to switches to manage them. Dev, please test on 1024x600 screen and if you list contact info on app description I'll contact you.