Rover Systems eMobile

Rover Systems eMobile

1,000 - 5,000 downloads

Add this app to your lists
1. Overview
Rover Systems eMobile(Android) mobile client software, which is based on Android OS (Version 2.0 or higher), can be used to remotely monitor the live video from embedded DVR, network camera, network speed dome and DVS via wireless network, and realize PTZ control as well.With this software installed in your mobile device, users are able to log on to the front-end device via WIFI, 2G or 3G; besides, if there is no public IP available, it’s accessible by using a dynamic name, or by forwarding ports to the public IP of router.
Notes:
1.WIFI, 2G or 3G access service must be supported by the mobile phone.
2.Network traffic charges may be produced during the use of this client software. Please refer to the local ISP.

2. System Requirements
Hardware: CPU 500MHz or higher, available RAM at least 15MB
Software: Android OS V2.0 or later version

3. Performance Description
Encoding ParameterMain or sub-stream
Video CompressionH.264 or MPEG4
Frame Type BBP or single P
Frame Rate Depending on the performance of mobile phone and the frame rate settings of camera
Resolution Main stream: 1080P/720P/4CIF/DCIF/2CIF/CIF/QCIF (depending on camera connected)
Sub-stream: CIF/QCIF (depending on camera connected)
Stream Type Video & Audio, Video
Bit Rate 32~2048Kbps(depending on the network environment)

4. Resolution Support
Phone: 320*480, 480*800, 480*854, 960*540, 1280*720, 1280*800
Tablet: 1024*600, 1280*800

Tags: rover system e mobile, how to setup rover systems remote viewing via mobile, how to connect rover system to, rover systems emobile, how to add a device on rover cctv, using mobile roversystems, rover systems dvr remote monitoring software, rover system emobile how to add device, how to add devices on rover systems emobile, rover systems e mobile cod.

Comments and ratings for Rover Systems eMobile
  • (59 stars)

    by Marcuz Tubac on 05/03/2014

  • (59 stars)

    by bab c. on 08/06/2013

    Ok