by: Madman Marine Pty Ltd • 63
iRegatta is a tactical Regatta application for android devices, used for yachting and sailing regattas.
You can try "iRegatta" instead of "iRegatta Pro", it'll give you 4 minutes of testing at each startup, and you can then buy all the features you need as In-App purchases.
The built-in GPS unit and the unique graphical possibilities of these devices, make them ideal for such an application.
IMPORTANT: iRegatta requires internal GPS or Bluetooth/WiFi connection to NMEA data, to get the sailing data required for calculations.
iRegatta has been available for iPhone/iPad for years, and has a lot of useful features.
Now the Android version has similar features, except that NMEA instrument data also can be used with a BlueTooth connection (or a Wifi connection).
If you have a Android phone anyway, this is a cheap way to introduce you to the benefits of a GPS device, to help you leverage your regatta sailing performance.
A downside is of course the fact that most phones are not waterproof! But there are products out there, you can put your device into, to make it waterproof and still be able to operate it while sailing. In this way you can either mount it near your other instruments on your keelboat or strap it to your arm if you are sailing a dinghy.
Here you can see your the 4 most important readouts, for instance Heading, Speed, VMG and Wind Direction.
By tapping and holding one of the 4 main readouts for 2 seconds, they become configurable. Scroll down the list to chose the information you want to display. Many of the possible readouts are only updated if you have NMEA input.
If navigating towards a waypoint, you can configure your readouts to display distance/bearing.
There is also a lift indicator, showing you if you have been lifted by a wind shift, and graphs showing the development in your speed and VMG over a configurable amount of time and a performance bar.
Set your wind direction by storing your heading while sailing on upwind on starboard and port tack, or simply type it in.
Here you have your start countdown (including sync), and you can mark your starting line and iRegatta will calculate the distance to the line and indicate the favored end of the line, if wind direction is set.
Navigate to your favorite pre-stored waypoints, create a route of waypoints or create a new temporary waypoint by distance/bearing.
Here you can see your location (Lat & Lon), Max speed and Trip odometer. On the left hand side there is a polar diagram. tap it and it'll increase in size. Change the wind speed to see the different polars. These polars are the base for the performance bar in the race view.
If you choose to turn on "NMEA input via BlueTooth" in the iRegatta setting, you will be able to receive instrument data from your boat, if it's able to transmit NMEA information using BlueTooth.
Be aware that information from different instruments can be transmitted in different NMEA syntaxes. Not all NMEA syntaxes are implemented in iRegatta.
If you have an AIS receiver that transmits AIS data as NMEA sentences, an AIS radar-like display will show all vessel information received.
Tags: iregatta , iregatta manual 3.07 , iregatta manual , regatta tack compass , sail tracker polar nmea sentences , iregatta pro apk , display nmea data , bluetooth iregatta , nmea polar