For all planes and aeronautics fans I designed this barometric altimeter with an aero style.

    *** if you like Altimeter : thank you for updating to PRO version you will get more features ***
    *** Thanks for your support ! ***

    Altimeter is an analog altimeter with aviation design style : its goal is to work off-line (plane or back-country).

    Here are the main features :

    - 3 hands analog altimeter (Hundreds, thousands & tens of thousands).
    - Sensor "Autostart" feature (see preferences).
    - Automatic sensor stop on exit.
    - Preferences save on exit (including calibration data).
    - 2 altitudes providers : Barometric sensor(*) or GPS chip (no network).
    - Robust Barometric Algorithm.
    - Units are feet or meters for altitude and hPa or inHg for pressure (*).
    - Displays QFE / Altitude / QNH (*).
    - Altitude speech.
    - Calibration function(*) with altitude or pressure (QNH) including a reset function.
    - User interface in English, French, German (Thanks Peter), Italian (Thanks Cosimo !).
    - Free application... no ad !

    (*) These functions require a barometric sensor in your android device (tablet like Motorola Xoom, Google Nexus ics 4, Samsung Note, ...).

    By default the program will attempt to start with the pressure sensor. If it is not found then it switch on the GPS provider (true GPS not the network GPS). A message is displayed if the pressure sensor is not found.

    Please note also that the program doesn't use Internet to get the altitude. For that reason, the program when used with GPS won't run indoor !

    The GPS, was implemented to overcome the lack of pressure sensor on most devices.

    The pressure sensor is very accurate : with a resolution of 0.1hPa and after calibration, accuracy is about 1m. This is awesome !

    The calibration function of the pressure sensor(*) is very simple. Just enter the current altitude reference (as with a hiking altimeter). The altitude is then automatically corrected. Of course, if the atmospheric pressure falls or rises the value won't be anymore the true one. It is therefore important for a barometric altimeter to be frequently "calibrated" with a new reference.

    A calibration function with the QNH pressure has been added also. It allows the altimeter to be calibrated during the fly. You have to provide the QNH pressure obtained from air traffic regulation or from grounded station.

    Tags: altimeter , barometric altimeter , free altemeter aplication , altimeter barometer , 3 needle altimeter , analog altimeter , barometer sensor free , altimeter galaxy note , pressure sensor

    Users review

    from 595 reviews



    Users comments for Altimeter

    Joe Wojniak

    by Joe Wojniak

    Oct 29, 2017  |  "Great"

    I like the easy to read display. Read altitude at home close to 5000 ft. Will use hiking in mtns.

    William Skatesbee

    by William Skatesbee

    Oct 04, 2017  |  "Awesome"

    It works perfectly. It would be nice if calibration was made more user friendly, ex.: Manually enter or less sensitive.

    A Google user

    by A Google user

    Oct 03, 2017  |  "Good"

    If the automatic start is charged to off, there seems to be no manual start. Also it needs a lot of location data. Worst is that the software cannot spell metre correctly. Meters as for recording stuf, like sewage or gas

    Sherwin Gooch

    by Sherwin Gooch

    Sep 22, 2017  |  "Good"

    Only works with GPS enabled.


    by Jammoko

    Sep 14, 2017  |  "Poor"

    Junk Does not work

    Steve Summerlin

    by Steve Summerlin

    Sep 02, 2017  |  "OK"

    Never had any luck with altimeters. Using barometric pressure it says I am 161 feet below sea level. Using GPS it says I am 106 feet above sea level. My house is based at 9.5 feet above sea level in South Florida according to city records. I figure I am currently sitting with the phone 3 feet off of the ground. It should be reading about 12.5 feet above sea level. It could be the phone. I have had multiple phones and each were wrong using various apps. I may try with the manual calibration.