by: talexop • 36
This application helps to calculate the power consumption in KWh or Cost of your installation that you are charged off! You can also use it to calculate how much you have to pay if you have a constant load.
First of all you have to use the settings page to configure your installation.
The most important factor is the “Turns per KWh” this defines the power meter type you have.
To Measure your consumption you have to follow these steps:
• Go down to your power meter
• When the mark of the disk passes the line press the “Start Measurement” button
• After one cycle press the “Stop measurement” button to hold the measurement.
The program now returns the calculated Watts over one turn of the disk period.