Control your robot via bluetooth
* Easy to use with Robo-circle 3S or any robot which support with BlueStick - Serial Port Profile (SPP) Bluetooth Module. Check Product at
BlueStick - http://goo.gl/gKdSG
Robo-CIRCLE 3S - http://goo.gl/Sj6aJ
Robo-Creator - http://goo.gl/b7jfs
POP-BOT XT Standard - http://goo.gl/aLMu7
For Robo-CIRCLE3S download thi…
Direct Bluetooth Connection for device which cannot find some bluetooth device
Just insert bluetooth address and connect it directly although the device did not found bluetooth device
• Turn on bluetooth device
• Insert device bluetooth address on Direct Bluetooth
• Pair it
• You will get paireing request dialog , finish!
Application for "Blue Music Box" project
Blue Music box is MP3 Player which controlled by android device via bluetooth
Blue Music Box include Unicon board, MKIT-4, BlueStick and USB Speaker
Check Product at
BlueStick - http://goo.gl/gKdSG
Unicon Board - http://goo.gl/u0XmY
MKIT-4 - http://goo.gl/RxanN
Download Android source code and…
This application is camera application which help you to take a self photo by use IOIO or IOIO-Q board
You can use your device connect with IOIO or IOIO-Q board in dock call "android camera dock".It's a IOIO project to control servo motor to pan your camera to left or right and snap by remote control. If you doesn't connect with I…
Let's try to build your own android robot from IOIO or IOIO-Q board
This is ioio robot project that we need to use IOIO or IOIO-Q board applied to robot which camera (Use two android devices)
first device connected with IOIO board for control robot and use for camera
second device used for control robot motion , receiver image from camera of th…
Application for IOIO or IOIO-Q board which help to learning in code for IOIO or IOIO-Q board
This appliaction include example application and code for beginner with example circuit
Explain : This application use with IOIO or IOIO-Q board you can buy in www.inex.co.th
Application for control POP-BOX XT via WiFi. Use with WiFly Module from Sparkfun to communication by TCP connection. Make your android device to WiFi Hotspot and programmed POP-BOT XT to connected to that hotspot.
You can control moving direction and get data from sensor on POP-BOT XT
** WLAN only, not include internet connection.
If you want to…
Time to change IOIO and IOIO-Q board to Robot car by IOIO Robotic Activity board (IOIO-RAB) which 6 built-in DC motor driver, 1 Piezo speaker, 4 Servo connectors,and Battery pack connector.
This application for control IOIO robot car with dual side controller which easier to control than simple button. You can control the movement direction and spe…
LCD Controller is an application use to control your LCD 16x2 which connect with IOIO or IOIO-Q board to display message on it. User just connect IOIO or IOIO-Q board with LCD 16x2, Press "Initial" button in application an type text as you want and then press "Set".LCD will show message as you set. Button "Clear" use f…
Application for control Unicon board via WiFi to control LED. Use with WiFly Module from Sparkfun to communication by TCP connection. Make your android device to WiFi Hotspot and programmed POP-BOT XT to connected to that hotspot. You can applied circuit to real light bulb or outlet in your home.
If you want to control with the PC, use this.